Catalog No.10-1

 　
　

General type　Blow-nozzle

ブローノズル　集合写真

    Rapid removing water, Drying, Cooling,
    Even surface treatment, Air-curtain

ブローノズル　使用例
ブローノズル　取り付けた例
･Example of the setting
to turbo-blower		 ･Example of the setting
to vortex-blower

 

[ Common specification ]

[ Structure ]
･ Resisting pressure : 49kPa
･ Max. use temp. : 350ﾟC
･ Material : SUS304
･ Accuracy rating : Disorder of the air-
    speed of the right and left is less than
    plus minus 3.5%
･ Fixed metal fittings is equipped by
    default to all type


ブローノズル　分解写真
　

　

Specification
Model Bore of the inlet Slit width Max. use discharge air-speed Manufacturable length Price
25DS φ25 1.0mm 100m/s 100mm - 300mm JPY 54,230/  100 - 200mm
JPY 57,530/  210 - 300mm
JPY 60,940/  310 - 400mm
  65m/s 100mm - 400mm
1.5mm   65m/s 100mm - 300mm
  45m/s 100mm - 400mm
38DS φ38 1.0mm 100m/s 300mm - 600mm JPY 77,880/  300 - 500mm
JPY 84,700/  510 - 700mm
JPY 96,470/  710 - 1000mm
  65m/s  300mm - 1000mm
1.5mm   65m/s 300mm - 600mm
  45m/s  300mm - 1000mm
50DS φ50 1.0mm 100m/s  600mm - 1000mm JPY 101,640/  600 -  900mm
JPY 116,600/  910 - 1200mm
JPY 132,000/1210 - 1500mm
  65m/s  600mm - 1500mm
1.5mm   65m/s  600mm - 1000mm
  45m/s  600mm - 1500mm
2.0mm   50m/s  600mm - 1000mm
  35m/s  600mm  -  1500mm

　

Pen-nozzle

 　 　

For compressor
　
ペンノズル　集合写真

ペンノズル　スリット部拡大写真
 　

　

･ Strong air-speed of 200 - 400m/s is obtained
     from the discharge slit within the distance is
    100mm by using a little compression air.
･ This is made of all stainless steel, high
    efficiency is demonstrated, and the resonance
     sound does not occur from the pen-nozzle.
･ This can use as the air amplifier by the
     compression air from the compressor is
     supplied.
･ Heatproof temp. 350ﾟC

Specification
Straight slit
Model PEN50 PEN75 PEN100 PEN125 PEN150 PEN200 PEN250 PEN300
Slit width 0.2mm
Form of inlet R 1/4 (8A) Screw for pipes R3/8 (10A) Screw for pipes
Slit length 50mm 75mm 100mm 125mm 150mm 200mm 250mm 300mm
Price JPY 7,920 JPY 8,910 JPY 9,680 JPY 10,670 JPY 11,770 JPY 16,170 JPY 17,820 JPY 21,120
Oblique slit
Model PEN50B PEN75B PEN100B PEN125B PEN150B PEN200B PEN250B PEN300B
Slit width 0.2mm
Form of inlet R 1/4 (8A) Screw for pipes R3/8 (10A) Screw for pipes
Slit length 50mm 75mm 100mm 125mm 150mm 200mm 250mm 300mm
Price JPY 8,800 JPY 9,680 JPY 10,670 JPY 11,770 JPY 13,090 JPY 19,690 JPY 21,120 JPY 24,750

　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　

Return to the top page

 Kansai Electric Heat Corp.
   4-18, Takaidanishi 5-chome, Higashiosaka-city 577-8566 JAPAN
  TEL : +816-6785-6001　FAX : +816-6785-6002
  E-mail ： sales@kansaidennetsu.co.jp