|
Catalog No.10 |
|
||
|
||
Rapid removing water, Drying, Cooling |
||
High-blow nozzle |
||
|
||
|
|
Dry at the same time as the removing water, Removing water of the printed
circuit board, Air knife coater, Even surface treatment, Defroster, Air-curtain, Rinse washing |
Common specification |
|||||||||||||
|
|||||||||||||
|
|||||||||||||
Specification |
|||||||||||||
Model | Bore of the inlet | Adjustment range of slit width | Basis air volume par 1-inlet | Max. area of the slit par 1-inlet | Manufacturable length | Price | |||||||
15AL | R1/2 | 0.5mm - 2.0mm | 0.8m3/min | 205mm2 | 100mm - 600mm | JPY 45,540 - 76,560 | |||||||
25AL | R1 | 0.5mm - 2.0mm | 2.3m3/min | 510mm2 | 200mm - 1000mm | JPY 47,850 - 122,100 | |||||||
40AL | R11/2 | 1.0mm - 3.0mm | 4.8m3/min | 1230mm2 | 200mm - 1500mm | JPY 62,260 - 238,700 | |||||||
50AL | R2 | 1.0mm - 5.0mm | 7.6m3/min | 1950mm2 | 300mm - 2000mm | JPY 90,970 -323,400 |
Variation of the air inlet |
|||
Model |
Quantity of the air inlet |
Type | Reference photograph |
15AL 25AL 40AL 50AL |
Side 1 inlet | S1 |
|
Side 2 inlets | S2 |
|
|
Upper 1 inlet | U1 |
|
|
Upper 2 inlets | U2 |
|
|
25AL 40AL 50AL |
Upper 3 inlets | U3 |
|
40AL 50AL |
Upper 4 inlets | U4 |
|
15AL 25AL 40AL 50AL |
Front 1 inlet | F1 |
|
Front 2 inlets | F2 |
|
|
25AL 40AL 50AL |
Front 3 inlets | F3 |
|
40AL 50AL |
Front 4 inlets | F4 |
|
Socket for hose connection (All aluminum) (Option) |
|
Kansai Electric Heat Corp. |
4-18, Takaidanishi 5-chome, Higashiosaka-city 577-8566 JAPAN |
TEL : +816-6785-6001 FAX : +816-6785-6002 |
E-mail : sales@kansaidennetsu.co.jp |