Catalog No.6
Another 2

 
Electric heater for generating high temp. hot-air
 

Pen heater

 
* This is the clean heater that the self emission
    dust quantity was restrained to about class
    10,000. 

 * Light, elongate, and slim form.

 * High accuracy temp. can be controlled by
    Multi-controller.

 * For the compressor air.

 * Max. hot-air temp. 750゜C (PH22 800W)
 


[ Specification ]

Pen heater

Model PH12 PH22
Type 1200-04K 1200-06K 1200-08K
Power Single-phase 200V 50/60Hz
Heater capacity 400W 600W 800W
Max. hot-air temp. 600゜C 700゜C 750゜C
A-sensor / B-sensor A-sensor : For detecting the hot-air /
B-sensor : For detecting the hot-start operation and overheat temp.
Min. usable air volume 10NL/min  * Please use less than 400゜C.
Max. usable air volume 250L/min
Resisting pressure 0.5MPa (Max.)
Matching Multi-controller TRC202-P04 TRC202-P06 TRC202-P08
Category Standard Standard Standard


 

Multi-controller for Pen heater TRC202-P type

Model TRC202-P04 TRC202-P06 TRC202-P08
Power 50/60Hz Single-phase AC100V - Single-phase AC200V・220V
Matching
Pen heater
PH12(1200-04K) PH22(1200-06K) PH22(1200-08K)
Hot-air temp. control range Normal - 600゜C Normal - 650゜C Normal - 700゜C
Hot-start temp.
control range
Normal + α - 250゜C
Overheat temp.
control range
550゜C 650゜C 700゜C
Category Standard Standard Standard

 

Return to the top page

 Kansai Electric Heat Corp.
   4-18, Takaidanishi 5-chome, Higashiosaka-city 577-8566 JAPAN
  TEL : +816-6785-6001 FAX : +816-6785-6002
  E-mail : sales@kansaidennetsu.co.jp