|
Catalog No.6 |
Electric
heater for generating high temp. hot-air. SHP40/SHP50 |
|
Two K-type thermocouples are equipped standard, and hot-start operation is possible. - A-sensor for controlling the hot-air is equipped to the outlet, and B-sensor for detecting the overheat prevention is equipped near the heater element. SHP40, 50 can use by the ability of 100% and safety because the actual temp. is measured. High accuracy the temp. control is possibility by the independence type auto-temp. controller. - This does not receive the influence of heat from the heater and heating atmosphere because the temp. control circuit is not incorporated to the heater inside. So, the high accuracy and excellent temp. control is possible. Heater does not snap easily by using with TRC501. - Please use the independence type auto-temp. controller TRC501 together. |
Model | SHP40 | SHP50 | ||
Type | 3220~440-4.5K | 3220~440-6.5K | 3220~440-8.5K | 3220~440-10.5K |
Power | 3-Phase 220V・380V・400V・440V 50/60Hz | |||
Heater capacity | 4.5kW | 6.5kW | 8.5kW | 10.5kW |
Max. hot-air temp. | 800゚C (When TRC501 is used.) | |||
Hot-start temp. | Less then 300゚C (When TRC501 is used.) | |||
Max. usable air volume | 4.7m3/min | 4.4m3/min | ||
Min. usable air volume | 0.29Nm3/min | 0.43Nm3/min | 0.57Nm3/min | 0.7Nm3/min |
Resisting pressure | 200kPa | |||
Outlet bore / Inlet bore | φ72.7 / φ38 hose nipple | |||
Weight | 3.5kg | 4.0kg | ||
Price | JPY 242,000 | JPY 242,000 | JPY 278,300 | JPY 300,300 |
Outlet flange
type |
Model | SHP40F | SHP50F | ||
Type | 3220~440-4.5K-F | 3220~440-6.5K-F | 3220~440-8.5K-F | 3220~440-10.5K-F | |
Price | JPY 249,700 | JPY 249,700 | JPY 287,100 | JPY 310,200 |
Auto-temp. controller
TRC501 Specification
|
Model | TRC501 |
Power 50/60Hz | 3-phase 220・380V・400・440V / 380・400・440V | |
Matching heater | SHP40・SHP50 | |
Control method / Instructions accuracy |
Zero-cross cycle control (PID action) / 800゚C plus-minus 0.2%FS |
|
Weight | 10.5kg | |
Price | JPY 364,100 | |
Function |
・ Hot-start operation circuit ・ Chang the operation mode by the external signal - Hot-start operation / Normal operation ・ Heater ON/OFF by the external signal ・ Contact output terminal (Total abnormal, temp. alarm, Operation situation) ・ Remote control by removing the control unit |
Kansai Electric Heat Corp. |
4-18, Takaidanishi 5-chome, Higashiosaka-city 577-8566 JAPAN |
TEL : +816-6785-6001 FAX : +816-6785-6002 |
E-mail : sales@kansaidennetsu.co.jp |